- This topic has 1 reply, 1 voice, and was last updated 8 years, 4 months ago by .
-
Posts
-
Hello, new here and hoping for some help with my canoe. I have done lots of research, but want to make sure I do this right.
The canoe is an older one, not even sure what year it was made. It’s a home made kevlar/fibreglass canoe. The gunnels were rotted so I removed them and have purchased new ones. I am going to re-paint it, but their is hairline cracks in the hull.
I have read some people use a dremmel and ream the cracks bigger, then fill with bondo. I was going to sand the hull with 220 then paint, sanding between coats.
My main question was how to deal with the cracks. Maybe they arnt a big deal and I can paint over?
I linked to a few photos, I have already pressure washed it, and exposed some of the old paint.
Any advice would be great.
Thanks
https://postimg.org/image/lmqk4xgep/
So the cracks are where their is structural supports on the inside.
https://postimg.org/image/yd78bqemv/
- You must be logged in to reply to this topic.
